Wi-Fi Connected but No Internet
In plain English
If your PC says Wi-Fi is connected but there is no internet, the wireless link itself is usually working, but the route from your PC to the internet is failing somewhere. This guide walks through that split first, and you can also browse the full device-problem guide if this is part of a bigger Windows problem.
First safe step
Try another device on the same Wi-Fi first. If every device is offline, the problem is on the router or internet side, not inside Windows on one PC. If only this one computer fails while the others work, focus on the PC side instead.
Split the problem first, then fix the side that is at fault.
If your PC says Wi-Fi is connected but there is no internet, the wireless link itself is usually working, but the route from your PC to the internet is failing somewhere. This guide walks through that split first, and you can also browse the full device-problem guide if this is part of a bigger Windows problem.
The fastest check is simple. See whether other phones, tablets, or PCs on the same Wi-Fi can get online. If every device is offline, the problem is probably your router, modem, or internet service. If only one Windows PC has the problem, the router may be fine and the fix is more likely on the PC side.
That matters because this is different from what to do when the Wi-Fi icon is missing instead of connected, or the driver case if Windows shows no working network adapter. Below, you'll isolate the router from the PC, then try safe Windows repairs such as renewing the network connection, clearing DNS, and using Network reset only if the simpler steps fail.
What this message usually means and the first safe check
When Windows says Wi-Fi is connected but there is no internet, the wireless link itself is usually working. The problem is often the next step in the path, your router, modem, internet service, or this PC's network settings, so the computer can join the network but cannot reach the web.
The first safe check is simple: try another device on the same Wi-Fi. Use a phone, tablet, TV, or a second computer that is already in the house, and see whether it can open a website or app that needs the internet.
If every device on that same Wi-Fi fails, the problem is probably on the router or internet side, not inside Windows on one PC. If only this one computer fails while the other devices work, focus on the PC side instead.
This is also a different problem from what to do when the Wi-Fi icon is missing instead of connected, or the driver case if Windows shows no working network adapter. If your adapter has vanished from Windows entirely, see the hidden-device case if the adapter is missing from Windows.
1 Check whether the problem is the router or the Windows PC
Before you repair anything, do two quick tests. First, check a phone, tablet, or another computer on the same Wi-Fi. If that device also says connected but cannot open a site, the problem is probably the router, modem, or your internet provider, not Windows.
Next, test the problem PC on a different network. The easiest way is a phone hotspot if you have one. If the PC works on the hotspot, your Windows setup is probably fine and the trouble is with the home network. If the PC still has no internet on a different network, the fault is likely on that PC.
These two tests save time because they split the problem cleanly. Same Wi-Fi failing on every device points to the network side. One PC failing across more than one network points to Windows, its adapter settings, or security software on that machine.
If your Wi-Fi list is missing completely, that is a different problem, see what to do when the Wi-Fi icon is missing instead of connected. If Windows cannot use the adapter at all, check the driver case if Windows shows no working network adapter, or the hidden-device case if the adapter is missing from Windows. If this started right after patching, it can also help to check how long to wait before restarting if the outage started during an update.
2 Fix the router or internet side first if every device is offline Free
If every phone, tablet, TV, and PC on the same Wi-Fi says connected but nothing opens, stop on the router side first. Windows repair steps on one computer will not help if the router or modem itself has lost the internet connection.
Start with the simple checks. Make sure the modem and router both have power, the internet cable is firmly seated, and any separate modem-to-router cable has not come loose. Then look at the lights. A missing or red internet light usually means the problem is between your home and your internet provider, not inside Windows.
Now power-cycle the equipment in order. Unplug the modem first, then the router. Wait at least 30 seconds. Plug the modem back in and give it a few minutes to fully reconnect. When its normal online lights return, plug the router back in and wait another few minutes before testing your devices again.
If the outage started right after patching the PC, that timing can be misleading. If every device is offline, it is still a network-side problem, even if one Windows computer updated first. If you are dealing with a different symptom, see what to do when the Wi-Fi icon is missing instead of connected, or the driver case if Windows shows no working network adapter.
✓ Every device online? You can stop here.
3 Use Windows network commands to repair the PC side Free
If the problem follows one Windows PC across more than one network, try the built-in repair commands next. Open Command Prompt as administrator, right-click the Start menu and choose Command Prompt or search for it, then pick Run as administrator if that option appears. If you cannot even get to Wi-Fi controls, see what to do when the Wi-Fi icon is missing instead of connected first.
Run these commands one at a time, in this order, pressing Enter after each one: netsh winsock reset, netsh int ip reset, ipconfig /release, ipconfig /renew, then ipconfig /flushdns. The two netsh commands rebuild parts of the Windows network stack. The ipconfig commands ask Windows for a fresh local network address, and the last one clears saved name lookups.
Wait for each command to finish before starting the next one. You may see a temporary disconnect after ipconfig /release, which is normal. If a command returns an access or adapter error, that can point to the driver case if Windows shows no working network adapter, or even the hidden-device case if the adapter is missing from Windows.
Restart the PC after the full set of commands, even if one of them says the reset will take effect later. Then reconnect to your Wi-Fi and test a normal website. If this started right after patching, it is worth checking how long to wait before restarting if the outage started during an update, because an interrupted update can leave networking half-finished until the restart completes.
4 Check the adapter, IP address, and DNS settings Free
First, make sure the Wi-Fi adapter is actually on and connected. In Windows 11, open Settings and check Network & internet > Wi-Fi. In Windows 10, check Settings > Network & Internet > Wi-Fi. If Wi-Fi is missing completely, see what to do when the Wi-Fi icon is missing instead of connected.
If Wi-Fi shows connected, open Device Manager and expand Network adapters. Your wireless adapter should appear without a down arrow or warning mark. If Windows says there is no working adapter, check the driver case if Windows shows no working network adapter. If the adapter is absent, that fits the hidden-device case if the adapter is missing from Windows.
Next, check whether the PC got a usable address from the router. Open Command Prompt, type ipconfig, and look at the Wi-Fi section. If the IPv4 address starts with 169.254, the PC did not get a proper address, even though Wi-Fi still says connected.
Last, check DNS. Go to Wi-Fi properties, open Internet Protocol Version 4 (TCP/IPv4), and make sure the PC is usually set to get an IP address and DNS server address automatically, unless your network was set up on purpose with manual numbers. A wrong manual DNS entry can stop web browsing while the Wi-Fi link itself still works.
5 Use Network reset only after the simpler fixes fail Last resort
Use Network reset only if the earlier PC-side fixes did not help. This step removes and reinstalls your network adapters, clears saved network settings, and puts networking back to its default state. It is a bigger change than the earlier steps, so treat it as the last Windows-side repair on this page.
Before you start, save your Wi-Fi password if you do not know it by memory. You should also expect Windows to restart the PC after the reset. If your adapter is missing from Windows completely, read about the hidden-device case if the adapter is missing from Windows first, because a reset may not bring back hardware that Windows cannot see.
To run it, open Settings, then go to network settings and find Network reset. Confirm the reset and let the PC restart. If this started right after patching and the machine is still finishing changes, check how long to wait before restarting if the outage started during an update before forcing extra restarts.
After the restart, connect to your Wi-Fi again, enter the password, and test a few sites in your browser. If Wi-Fi still connects but there is still no internet, the next branch is usually the driver case if Windows shows no working network adapter, or a router and ISP issue that needs a second look.
Frequently asked questions
Why does Wi-Fi say connected but I still have no internet?
The PC has joined the wireless network, but the route to the internet after that point is not working. Test another device on the same Wi-Fi to find out whether the fault is with the router or with that one PC.
Should I try Network reset first?
No. Try the router checks and the simpler PC steps first. Network reset removes adapters and saved network settings, so save your Wi-Fi passwords before you use it.
What should I do if the problem comes back after a restart?
Test another device again when it happens. If every device is offline, focus on the router, modem, or provider side. If only one PC is offline, focus on that PC again.
The short version
The order matters more than any single fix. Test another device first, fix the router side when every device is down, and work through the PC steps only when one computer is at fault. That split keeps you from resetting a PC that was never the problem.
If the connection comes back, use it as normal and note what changed. If it stays offline after you have worked through the router side and then the PC side in order, the fault is likely with the adapter, the router, or the provider, and that is the point to seek help for the part that is still failing.
Different number on screen?
Type it exactly as it appears and get the plain-English answer.
Pop-up telling you to call?
That is a scam. Microsoft never asks you to phone a number.