0xPC Error Codes Look up a code
One safety rule: if a message shows a phone number to call, it is a scam: Microsoft never does that. Check any warning in 5 questions.

Home › Windows 10, ESU and Moving to Windows 11 › Turn On TPM 2.0 and Secure Boot in BIOS for Windows 11

TPM & Secure BootESU & Windows 11

Turn On TPM 2.0 and Secure Boot in BIOS for Windows 11

By Editorial Team · · 8 min read ✓ Checked against Microsoft documentation

In plain English

If you need Windows 11 to install or pass its hardware check, start with the basics in UEFI firmware. Use the Windows 10, ESU and Windows 11 decision hub if you still want help deciding whether this PC should move now or stay put, then come back here to turn on TPM 2.0 and Secure Boot.

First safe step

Save your work first, then check whether TPM is already on: press Windows key + R, type tpm.msc, and look for Specification Version 2.0 under TPM Manufacturer Information. Only change firmware settings if the check shows TPM is off or missing.

Try these in order, cheapest first

Check first, change firmware second, confirm last.

1What TPM and Secure Boot doFree
2Check model, save workFree
3Turn on TPM 2.0Free
4Turn on Secure BootFree
5Missing or grayed outFree
6Confirm in Windows

If you need Windows 11 to install or pass its hardware check, start with the basics in UEFI firmware. Use the Windows 10, ESU and Windows 11 decision hub if you still want help deciding whether this PC should move now or stay put, then come back here to turn on TPM 2.0 and Secure Boot.

These two settings tell Windows 11 that the PC can store security data in trusted hardware and start with verified startup files. That is what the Windows 11 check is really looking for, so this guide shows the exact names you may see in BIOS or UEFI, plus the simple checker to confirm whether your PC passes before you change BIOS settings.

You will also see what to do if the option is missing, gray, or turns itself back off after a reboot. If the PC still does not pass after the firmware change, the next step is to check what to read if the upgrade still fails after firmware settings are corrected.

1 What TPM 2.0 and Secure Boot do, and why Windows 11 asks for them Free

TPM 2.0 is the security check Windows 11 looks for before it trusts the PC to start and store sensitive data. Secure Boot is the startup check that helps block tampered boot files before Windows loads. If you want the plain-English reason behind the check, see what the Windows 11 check is really looking for.

The exact menu name changes from one PC maker to another, but the goal is the same: turn on the built-in firmware features Windows 11 expects. This is a BIOS or UEFI change, not a setting inside Windows.

If you want to compare your PC first, use the simple checker to confirm whether your PC passes before you change BIOS settings. That gives you a quick yes-or-no before you make firmware changes.

Some PCs already have both features on, and some older systems need a different boot mode before the option appears. If this PC should stay on Windows 10 instead of moving now, the ESU path can be the better choice.

2 Before you change anything: check your PC model, save work, and enter UEFI setup Free

Save your work first, then plug in AC power if this is a laptop. If you are in the middle of something open, close it now so you are not racing the clock once firmware setup opens.

Before you reboot, check the PC or motherboard brand and model in Windows. Open Task Manager or System Information if you already know where to look, or use the case label, laptop underside, or motherboard box so you can match the right menu later.

Instead of guessing a startup key, use Microsoft's Windows 11 route into UEFI setup: open Settings, go to System, then Recovery, choose Advanced startup, and select Restart now. On the Choose an option screen, select Troubleshoot, then Advanced options, then UEFI Firmware Settings, and select Restart. The PC restarts into UEFI setup, and the PC maker documents which key, if any, opens the same screen on that model.

Before you change TPM or Secure Boot settings, make sure you have the BitLocker recovery key for this PC, and suspend BitLocker protection first if the PC uses it. Changing TPM or UEFI firmware settings can trigger a BitLocker recovery prompt, so resume protection after the firmware change and confirm the PC starts normally.

3 How to turn on TPM 2.0 in BIOS or UEFI Free

If your PC already has TPM turned on, you may only need to confirm that the firmware is using the right mode, then save and restart. On many systems the setting is called Security Device, Security Device Support, TPM State, AMD fTPM switch, AMD PSP fTPM, Intel PTT, or Intel Platform Trust Technology, and it often lives under Security, Advanced, or Trusted Computing.

Open the firmware menu you found in the last step, then look for a security or advanced submenu. If you see a TPM option, set it to Enabled, Firmware TPM, PTT, or fTPM, depending on the brand wording, and leave the other settings alone unless the manual says they control the same feature.

If the menu already shows TPM as on, do not flip random storage or CPU options just to make the label change. Save the change, reboot, and then come back only if the option still looks off.

If you want to check before you change BIOS settings, use the simple checker to confirm whether your PC passes before you change BIOS settings. If the later Windows check still fails after firmware settings are correct, the next step is usually to compare it with what the Windows 11 check is really looking for, or to read the ESU path if this PC should stay on Windows 10 instead of moving now.

4 How to turn on Secure Boot without breaking startup Free

On many PCs, Secure Boot sits in the Boot, Security, or Authentication menu in UEFI setup. If your machine still uses Legacy BIOS or Compatibility Support Module, switch the firmware to UEFI first, because Secure Boot needs UEFI mode and cannot be turned on while the PC boots in Legacy mode.

Look for a setting named Secure Boot, Secure Boot Control, or a similar vendor label. If it is gray, check whether CSM is still on, then turn CSM off before you try again. Do not switch a Legacy install to UEFI on its own: a Windows install made for Legacy BIOS will not start after a firmware-only switch, so convert the disk first with the MBR2GPT tool and then reconfigure the firmware to UEFI.

Once Secure Boot shows as enabled, save the change carefully and restart the PC. If you are following the full Windows 11 path, keep the next step in mind with the simple checker to confirm whether your PC passes before you change BIOS settings, then return here only if the firmware screen still will not accept the setting.

If this machine is still meant to stay on Windows 10 for now, the ESU path if this PC should stay on Windows 10 instead of moving now is the better decision to review after you finish the firmware change.

✓ Both on? You can stop here.

5 If TPM or Secure Boot is missing, gray, or keeps turning off Free

If the setting is missing, your PC may be too old for the TPM or Secure Boot feature set Windows 11 wants, or the maker may have hidden it under a different menu name. If it is gray, another setting is usually blocking it, such as Legacy BIOS mode, CSM, or the wrong TPM mode.

If the option turns itself off after a restart, check whether you saved the change in firmware, then check the boot mode first: a PC still set to Legacy BIOS or CSM will not keep a Secure Boot change. If the mode is right and the setting still will not stick, check the PC maker’s support page for that exact model before you change anything else.

Do not keep guessing if the hardware simply does not support the requirement. Use the simple checker to confirm whether your PC passes before you change BIOS settings, and read what the Windows 11 check is really looking for so you can tell the difference between a blocked setting and an unsupported PC.

If the machine still fails after the firmware settings are corrected, the next stop is the upgrade-failure guide for rollback cases. If you decide this PC should stay on Windows 10 instead, the ESU path if this PC should stay on Windows 10 instead of moving now explains the tradeoff, and what happens later if you keep this PC on Windows 10 with ESU covers the end date.

6 Confirm the change in Windows and finish the Windows 11 check

After you restart, confirm TPM in Windows first: press Windows key + R, type tpm.msc, and look for Specification Version 2.0 under TPM Manufacturer Information. That is the check Microsoft documents, and it tells you whether TPM 2.0 is really on.

For a second check, open PowerShell as an administrator and run Confirm-SecureBootUEFI. If it returns True, Secure Boot is on and you are ready to try the Windows 11 upgrade again. If it returns False, Secure Boot is still off; if it says the cmdlet is not supported on this platform, the PC is not running in UEFI mode.

If the PC still fails, go back to the decision pages instead of guessing at more firmware changes. Read what the Windows 11 check is really looking for, then follow the ESU path if this PC should stay on Windows 10 instead of moving now, or review what happens later if you keep this PC on Windows 10 with ESU.

If the upgrade still rolls back after the firmware settings are correct, the next fix is Windows 11 Upgrade Failed and Rolled Back (0xC1900101): Fix It in Microsoft's Order. That page walks through the upgrade failure in the right order, after you have already confirmed TPM and Secure Boot.

Frequently asked questions

Should I leave TPM 2.0 and Secure Boot on after Windows 11 is installed?

Yes. Leave both on. Windows 11 expects them, and turning them off again can cause startup or check problems later.

Will turning on TPM 2.0 or Secure Boot delete my files?

No. Turning on either setting does not delete files. Save your work and close apps before you restart, because the restart will close open programs.

The short version

Once both settings stay on after a restart, the firmware work is done. Leave the other settings alone and try the Windows 11 upgrade again from Windows. If it still fails, work through the rollback steps in order instead of changing more firmware settings.

If the PC still cannot pass the check, that is a result, not a reason to keep changing firmware settings. Stay on Windows 10 for now, check the ESU option, and plan your next step when it suits you. A PC that stays stable on Windows 10 is better than one with firmware settings that keep resetting.

Different number on screen?

Type it exactly as it appears and get the plain-English answer.

Look up a code

Pop-up telling you to call?

That is a scam. Microsoft never asks you to phone a number.

Check it in 5 questions